Expedition 2WD V8-5.4L (2009)
Expansion Block/Orifice Tube: Service and Repair
Thermostatic Expansion Valve - Auxiliary Climate Control
Thermostatic Expansion Valve - Expedition, Navigator
Removal and Installation
1. Recover the refrigerant.
2. Remove the RH quarter trim panel.
3. Remove the Thermostatic Expansion Valve (TXV) fitting bolt and disconnect the fitting.
-
Discard the O-ring seals.
4. Remove the 2 TXV bolts.
5. Remove the TXV.
-
Discard the O-ring seals.
6. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
7. Evacuate, leak test and charge the refrigerant system.