Expedition 2WD V8-5.4L (2009)
11. Move the locking tab up and disconnect the selector lever cable from the manual lever ball stud.
12. Remove the 2 selector lever bracket bolts and remove the bracket.
13. Remove the front fuel supply tube, fuel vapor tube and fresh air tube pushpin from the bracket at the transmission bellhousing.
14. Disconnect the LH Heated Oxygen Sensor (HO2S) sensor electrical connector and remove the HO2S electrical connector wiring pushpin from the
fuel supply tube, fuel vapor tube and fresh air tube bracket at the rear of the transmission housing.
15. NOTE: Front pushpin retainer shown, other similar.
Disconnect the 3 transmission wiring harness pushpin retainers from the bracket at the transmission bellhousing, the transmission housing and the
bracket at the rear of the transmission.
16. Remove the fuel supply tube, fuel vapor tube, and fresh air tube from the bracket at the rear of the transmission housing.
17. Remove the fuel supply tube, fuel vapor tube, and fresh air tube from the vehicle.
Installation
All vehicles
1. Install the fresh air tube into the vehicle and connect the pushpin retainer to the bracket at the bellhousing and install the line into the bracket at the
