Expedition 2WD V8-5.4L (2009)
12. Install the 2 front tether pin-type retainers in the A-pillar sheet metal.
13. Install the front tether bracket and bolt in the A-pillar.
-
Tighten to 6 Nm (53 lb-in).
14. Connect the safety canopy module electrical connector.
Vehicles with a moonroof
15. Connect the moonroof rear drain hose and attach the drain hose retainer to the coat hook bracket.
All vehicles
16. Install the headliner.
17. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Air Bag(s)
Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion.