Expedition 2WD V8-5.4L (2009)
6. Remove and discard the transmission fluid filter.
7. Remove the transmission fluid pan gasket.
8. NOTICE: Do not pull on the wire harness to disconnect the connector or damage to the connector will occur.
Disconnect the main transmission electrical harness by twisting the outer shell and pulling back on the connector.
9. Pull the release tab and pull down on the bulkhead connector retainer.
10. NOTICE: Do not touch the electrical connector pins or the exposed solenoid tabs on the transmission vehicle harness connector.
Electrostatic discharge may occur and may cause damage to the mechatronic unit.
With the release tab down, pull the outer shell of the transmission vehicle harness connector out of the mechatronic assembly.
