Expedition 2WD V8-5.4L (2009)
Windshield Washer Pump: Service and Repair
Washer Pump
Removal and Installation
WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice.
Failure to follow these instructions may result in serious personal injury.
NOTICE: When servicing the windshield washer pump, be careful not to damage the windshield washer pump seal.
NOTICE: Do not operate the windshield washer pump before filling the windshield washer reservoir. Failure to do so may result in premature
pump failure.
1. Remove the RH headlamp assembly.
2. Position aside the shield as necessary to gain access to the washer pump.
3. Disconnect the windshield washer reservoir hoses.
4. Disconnect the windshield washer pump electrical connector.
5. Remove the windshield washer pump.
6. To install, reverse the removal procedure.