Expedition 4WD V8-5.4L VIN 5 (2006)
23. Attach the restraint system diagnostic tool to the vehicle harness side of the driver side safety canopy electrical connector.
All vehicles
24. Install the RCM fuse 19 (10A) to the CJB.
25. Connect the battery ground cable.
Reactivation
All vehicles
1. Remove the RCM fuse 19 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.
Vehicles with safety canopies
3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side safety canopy electrical connector.
4. Connect the driver side safety canopy electrical connector.
