Expedition 4WD V8-5.4L VIN 5 (2006)
8. CAUTION: Do not drive the vehicle after installing windshield glass until the urethane adhesive has cured. Inadequate curing of the
urethane adhesive adversely affects the strength of the urethane adhesive bond.
Apply a bead of Urethane Adhesive to the pinch weld just outside the foam butyl dam over the top of the existing urethane bed.
9. CAUTION: Open the windows to prevent the windshield glass from being pushed out by air pressure if a door is closed.
Using the alignment marks, install the windshield glass.
10. Install the windshield side mouldings.
NOTE: Be sure the moldings seat completely.
11. Install the headliner.
12. Install the interior rear view mirror.
13. Install the overhead console.