Explorer 2WD V6-245 4.0L (1994)
15.
Spread the adhesive on the 7-rivet plate as shown in Figure 6.
16.
Install two (2) rivets in the locations shown in Figure 6. Proceed to Step 20 if not separated.
17.
Install the lift cylinder bracket over the rivets and onto the 7-rivet plate. See Figure 6. Make sure the lift cylinder bracket is in the proper
orientation.
18.
Spread the adhesive on the lift cylinder bracket. See Figure 6.
19.
Install the lift cylinder bracket, 7-rivet plate and the rivets as an assembly onto the liftgate. Proceed to Step 21.
20.
Install the 7-rivet plate and the rivets as an assembly onto the liftgate.