Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
![background image](/ford/explorer_2wd/v6-245_4.0l_sohc_vin_e_efi/Page-2250002.png)
3. Remove the A/C clutch and shims from the compressor shaft.
4. Remove the pulley snap ring.
5. Remove the clutch pulley and bearing from the compressor shaft.
6. Remove the A/C clutch field coil.
1
Position Shaft Protector on the nose opening of the compressor.
2
Use (A) Differential Side Bearing Puller to remove the (B) field coil.
CAUTION: Do not use air tools.
7. Clean the A/C clutch field coil mounting surface head.
INSTALLATION