Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
(2) Install the forward clutch piston spring retainer.
6. Use the Clutch Spring Compressor to install the forward clutch piston spring retaining ring.
(1) Install the Clutch Spring Compressor and compress the forward clutch springs.
(2) Install the forward clutch piston spring retaining ring.
CAUTION: Do not fully depress the clutch spring compressor or damage to the spring retainer may occur.
7. When installing friction plates, the word "TOP" should face up. If reusing plates, grooves must be installed counterclockwise. Install the direct
clutch disc pack.
CAUTION:
-
The forward clutch friction plates are directional and must be installed with grooves pointing counterclockwise (I.D. to O.D.) and the word
"TOP" facing up.
-
If new plates are used, they should be soaked in clean transmission fluid for at least 30 minutes before assembly.
8. Install the five steel clutch plates and five friction clutch plates in alternating order starting with a steel clutch plate.