Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
7. Install the (4) main control valve body check balls.
8. Install the dark color plastic converter relief valve and spring.
NOTE: The springs and valves are not interchangeable.
9. Install the extension housing lube orifice and the metal silver electronic pressure control (EPC) limit relief valve and spring.
(1) Install the extension housing lube orifice.
(2) Install the silver metal EPC limit relief valve and spring.
NOTE: The springs and valves are not interchangeable.
10. Install the main control valve body separator plate and main control to case gasket.
(1) Position the main control valve body separator plate to the main control to case gasket and install separator plate to main control valve body.
(2) Install, do not tighten, the (3) separator plate screws.
NOTE:
-
Apply petroleum jelly on the valve body separator plate to hold the main control to case gaskets in place.
