Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
5. Rotate the differential pinion gears to align the differential pinion shaft bore.
6. Insert the differential pinion shaft.
7. Install the differential pinion shaft lock bolt.
NOTE:
-
If a new pinion shaft lock bolt is unavailable, coat the threads with Threadlock and Sealer or equivalent meeting Ford specification
WSK-M2G315-A5 and ESE-M4G204-A2 prior to installation.
-
Final lock bolt installation is after the axle shafts and U-washers are installed.
8. Use Differential Side Bearing Replacer to install the differential bearing(s) onto the differential case.