Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
9. Install the anti-lock speed sensor ring by aligning the tab on the anti-lock speed sensor ring with the slot on the differential case.
10. Start two of the ring gear bolts to make sure the alignment is correct.
11. Press the new (A) anti-lock speed sensor ring and the (B) ring gear on the differential case.
12. Apply Stud and Bearing Mount or equivalent meeting Ford specification WSK-M2G349-A1 to ring gear bolts and install the ten ring gear bolts.
13. Install the differential case.
Traction-Lok
DISASSEMBLY
1. Remove the differential case.
2. Remove the 10 ring gear bolts.