Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Front Door Latch: Service and Repair
REMOVAL
NOTE: Front door shown, rear door similar.
1. Disconnect the battery ground cable.
2. If removing the front door latch, remove the door lock cylinder; refer to Lock Cylinder-Door.
3. Remove the door trim panel.
4. Remove the door latch remote control.
1
Remove the screws.
2
Disconnect the door latch remote control link from the door latch remote control.
3
Remove the door latch remote control.
5. Disconnect the door latch actuating rod from the door latch.
6. Remove the rear glass run channel.
1
Remove the bolt.
2
Remove the rear glass run channel.