Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
6. Disconnect the lock cylinder rod.
1
Open the clip.
2
Disconnect the lock cylinder rod.
7. Remove the liftgate latch remote control bolt.
8. Remove the liftgate latch remote control from the liftgate.
INSTALLATION
NOTE: If equipped with power locks, perform steps one and two.
1. Install the latch remote control and (if equipped) the push button rod into the liftgate.
2. Install the liftgate lock actuator. For additional information, refer to Liftgate Lock Actuator.
3. Loosely install the liftgate latch remote control bolt.