Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Cruise Control Servo Cable: Adjustments
REMOVAL
1. Remove the speed control actuator cable clip.
2. Adjust the speed control actuator cable.
1
Make sure the throttle body cam is in the closed position.
2
Pull on the speed control actuator cable to remove any slack.
3
Back off the speed control actuator cable one notch.
NOTE
^
The speed control actuator cable must not be pulled tight for proper operation.
^
The throttle body cam will automatically spring set to the closed position. The throttle body cam must be in the closed position.
INSTALLATION
1. Install the speed control actuator cable clip.
1
Hold the speed control actuator cable.
2
Insert the speed control actuator clip securely.
