Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Remove the accelerator control splash shield. Remove the bolts.
2. Remove the speed control actuator cable .
1
Remove the bolt.
2
Remove the speed control actuator cable from the throttle linkage.
3. Remove the speed control actuator cable cap from the speed control servo.
^
Push in the locking arm on the speed control actuator cable cap then rotate the cap counterclockwise.
4. Disconnect the speed control core wire end from the speed control servo pulley.
1
Depress the spring retainer.
2
Slide the core wire end out of the speed control servo pulley.
