Explorer 2WD V6-245 4.0L VIN X SFI (1999)
6. Remove the swing rods.
1. Remove and discard the hog rings.
2. Remove the swing rods.
7. Remove the seat cushion trim cover.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the
seat cushion foam.
8. If equipped, and if necessary, remove the seat cushion heating element from the seat cushion foam.
CAUTION: Any time the seat cushion heating element is removed from the seat cushion foam, the foam must be replaced.
9. Remove the wire harness from the seat cushion frame.