Explorer 2WD V6-245 4.0L VIN X SFI (1999)
5. Hold the tool T-handle stationary and rotate the tool body to remove the broken A/C evaporator core orifice.
INSTALLATION
1. Lubricate and install the O-ring seals on the A/C evaporator core orifice.
^
Use PAG compressor oil, YN-12-C, F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C231-B.
2. Place the A/C evaporator core orifice into the Fixed Orifice Tube Remover/Replacer.
3. Insert the A/C evaporator core orifice into the condenser to evaporator tube until seated.
4. Remove the Fixed Orifice Tube Remover/Replacer.
5. Install the condenser to evaporator tube.