Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley
Special Tools
Removal
CAUTION: Install a new power steering pump pulley after it has been removed and installed two times.
1. Remove the engine cooling fan.
2. Remove the drive belt.
3. CAUTION: Do not apply pressure on the power steering pump rotor shaft Pressure will damage internal thrust areas of the power
steering pump.
Using the special tool, remove the power steering pump pulley.
Installation
1. Using the special tool, install the power steering pump pulley.
^
Inspect the pulley for paint marks in the web area near the hub. If there are two paint marks, discard the pulley. If there is no paint or one paint
mark, use a pencil to mark the web area of the pulley near the bulb.