Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Using the special tool, install the power steering pump pulley.
^
Inspect the pulley for paint marks in the web area near the hub. If there are two paint marks, discard the pulley. If there is no paint or one paint
mark, use a paint pencil to mark the web area of the pulley near the hub.
3. Using the special tool, install a new seal on the power steering pressure hose.
4. Connect the power steering pressure hose to the power steering pump.
5. Connect the power steering return line hose at the power steering pump.
6. Install the engine cooling fan.
7. Install the drive belt.
8. Fill and leak check the system.