Explorer 2WD V8-4.6L (2008)
Passenger Seat Cushion (Part 2)
Special Tool(s)
Special Tool(s)
Removal and Installation
NOTE:
-
The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.
-
The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
All seats
1. Remove the front seat.
Passenger seat with failed horizontal motor
2. To remove the occupant classification sensor (OCS) rails, remove the 2 horizontal screw block bolts. This will allow the power seat tracks to move
independently of each other for access to the 8 OCS rail bolts.