Explorer 2WD V8-4.6L VIN 8 (2006)
![background image](/ford/explorer_2wd/v8-4.6l_vin_8/Page-2508007.png)
8. Remove the wire harness bolt at the rear of the RH cylinder head.
All vehicles
9. Remove the suction accumulator-to-evaporator line.
10. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
Auxiliary Evaporator Outlet and Inlet Line - Front
AUXILIARY EVAPORATOR OUTLET AND INLET LINE - FRONT
Part 1