Explorer 2WD V8-4.6L VIN 8 (2006)
C1-C3
Normal Operation
The ABS module communicates with the diagnostic tool through the high speed controller area network (CAN), circuits VDB04 (WH/BU) and
VDB05 (WH). Check the high speed CAN circuits between the ABS module C155 and the data link connector (DLC) C251. The total resistance
values must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in one of the high speed CAN circuits, damage to the
DLC C251, damage to the ABS module C155, or a problem in an in-line connector.
Possible Causes
-
high speed CAN data plus circuit VDB04 (WH/BU) open