Explorer 2WD V8-4.6L VIN 8 (2006)
J1-J3
Normal Operation
The DSM communicates with the diagnostic tool through the medium speed controller area network (CAN), circuits VDB06 (GY/OG) and VDB07
(VT/OG). Check the medium speed CAN circuits between the DSM C341c and the data link connector (DLC) C251. The total resistance values must
not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in one of the high speed CAN circuits, damage to the DLC C251,
damage to the DSM C341c, or a problem in an in-line connector.
Possible Causes
-
medium speed CAN data plus circuit VDB06 (GY/OG) open