Explorer 2WD V8-4.6L VIN 8 (2006)
N2-N3
Normal Operation
The satellite radio receiver communicates with the diagnostic tool through the medium speed controller area network (CAN), circuits VDB06
(GY/OG) and VDB07 (VT/OG). Check the medium speed CAN circuits between the satellite radio receiver C3290 and the data link connector (DLC)
C251. The total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in one of the high speed CAN
circuits, damage to the DLC C251, damage to the satellite radio receiver C3290, or a problem in an in-line connector.
Possible Causes
-
medium speed CAN data plus circuit VDB06 (GY/OG) open
-
medium speed CAN data minus circuit VDB07 (VT/OG) open
-
satellite radio receiver C3290
-
satellite radio receiver
Test O: The Digital Versatile Disk (DVD) Player Does Not Respond To The Diagnostic Tool
PINPOINT TEST O: THE DIGITAL VERSATILE DISK (DVD) PLAYER DOES NOT RESPOND TO THE DIAGNOSTIC TOOL