Explorer 4WD V8-302 5.0L VIN P SFI (2000)
9. Install the differential case.
-
Position the differential case assembly, including the bearing cups and shims, in the rear axle housing. Install the differential bearing caps and
the differential bearing cap bolts.
10. Position the special tool.
1. Rotate the differential case to make sure the differential bearings are correctly seated.
2. Position the special tool.
11. Note: If runout is less than the specification, install a new ring gear and pinion. If runout exceeds the specification, the ring gear is true and the
concern is due to either a damaged differential case or differential bearings. Inspect the differential bearings. If the differential bearings are not
damaged, install a new differential case and differential bearings.
Measure the differential case runout without the ring gear.
