Explorer 4WD V8-302 5.0L VIN P SFI (2000)
Installation
All vehicles
1. Press a new anti-lock speed sensor ring, if removed, and the ring gear on the differential case.
-
Align the notch on the differential case flange with the notch on the anti-lock speed sensor ring.
2. Install the ring gear bolts.
-
Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-AI to ring gear bolts.
3. With pinion depth set and pinion installed, place the differential case in the rear axle housing.
4. Install a shim on the left side.