Explorer 4WD V8-302 5.0L VIN P SFI (2000)
6. Note: Apply only a light oil film on the pinion bearings before assembling the tools.
Assemble and position the special tools and pinion bearings in the axle housing.
1. Position the Screw.
2. Position the Aligning Adapter.
3. Position the inner pinion bearing.
4. Position the Gauge Disc.
5. Position the Gauge Block.
6. Position the outer pinion bearing.
7. Thread on the Handle.
7. Note: This step simulates pinion bearing preload.
Using a Nm (inch-pound) torque wrench, tighten the Handle to the specification.