Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
1. Route the new tonneau cover latch release cable through the tonneau cover.
2. Install the lock actuator housing.
-
Twist and push downward. The lock actuator housing will snap into place.
NOTE: Install the lock actuator housing into place with the molded line facing outward.
3. Connect the tonneau cover latch release cables to the LH and RH latches.
1
Insert the cable end through the lever arm.
2
Snap the cable conduit into the opening.
4. Position the tonneau cover latches and Install the four bolts.
