Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Cowl Moulding / Trim: Service and Repair
COWL PANEL GRILLE
Removal and Installation
1. Disconnect the driver side windshield washer hose from inside the engine compartment.
2. Remove the windshield wiper pivot arms.
1. Slide the clip so the windshield wiper pivot arm will clear the windshield wiper pivot shaft.
2. Pull the windshield wiper pivot arm from the windshield wiper pivot shaft.
3. Remove the cowl grille screw.
4. Remove the driver side cowl grille.
-
Pull up on the cowl grille to disengage the clips.
5. Remove the passenger side cowl grille.
-
Pull up on the cowl grille to disengage the clips and disconnect the washer hose.
6. To install, reverse the removal procedure.
