Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Fan Shroud: Service and Repair
Cooling Fan Shroud
Special Tools
Removal and Installation
Vehicles equipped with a 4.6L (3V) engine
1. Remove the air cleaner outlet pipe.
All vehicles
2. Remove the coolant expansion tank.
3. Remove the bolt and position the power steering fluid reservoir aside.
^
To install, tighten to 10 Nm (89 inch lbs.).
4. Remove the bolts, then unclip the upper fan shroud from the lower fan shroud and remove the upper fan shroud.
^
To install, tighten to 7 Nm (62 inch lbs.).