Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
5. Disconnect the fan clutch electrical connector.
6. Remove the fan clutch wiring harness bracket bolt.
^
To install, tighten to 7 Nm (62 inch lbs.).
7. Using the special tools, remove the cooling fan.
^
To install, tighten to 55 Nm (41 ft. lbs.).
8. Remove the bolts and the lower fan shroud.
^
To install, tighten to 7 Nm (62 inch lbs.).
9. To install, reverse the removal procedure.