F 150 2WD V8-4.6L (2008)
![background image](/ford/f_150_2wd/v8-4.6l/Page-669006.png)
7. Connect the fuel hose spring lock coupling. Release the fuel system pressure.
8. Connect the vacuum hose.
9. Install the power steering reservoir support bracket and the 3 bolts.
^
Tighten the 2 bracket-to-power steering reservoir bolts to 17 Nm (13 lb-ft).
^
Tighten the power steering reservoir bracket-to-thermostat housing bolt to 11 Nm (8 lb-ft).
10. Connect the heater coolant hose.
11. Connect the upper radiator coolant hose.