F 150 2WD V8-4.6L (2008)
12. Connect the electronic throttle control electrical connector.
13. Connect the fuel rail pressure and temperature sensor electrical connector.
14. Connect the fuel rail pressure and temperature sensor vacuum connector.
15. Connect the 8 fuel injector electrical connectors.
16. Connect the vacuum and coolant hose.
17. Connect the brake booster vacuum hose and the EVAP hose quick connect coupling.
18. Install the EGR system module tube.
^
Tighten to 40 Nm (30 lb-ft).
19. Connect the EGR system module electrical connector.
20. Position the PCV tube and connect the quick connect couplings. For additional information, refer to Fuel Delivery and Air Induction.
21. Install the ignition coils.
22. Install the generator.
23. Install the air cleaner outlet pipe.
24. Connect the battery ground cable. For additional information, refer to Battery.
25. Fill and bleed the engine cooling system.