F 150 2WD V8-4.6L (2008)
15. Remove the bolts and position the power steering pump assembly aside.
16. Disconnect the camshaft position (CMP) sensor electrical connector.
17. Remove the (CMP) sensor bolt and the CMP sensor.
18. Remove the nut and position the LH radio interference capacitor aside.
19. Remove the nut and the upper radiator hose bracket.
20. Remove the nut and position the RH radio interference capacitor aside.
21. Disconnect the crankshaft position (CKP) sensor electrical connector.
22. Remove the 4 oil pan bolts.
23. Remove the nut and the A/C manifold and tube assembly support bracket.
24. If equipped, remove the nut and the transmission cooler tube support bracket.