F 150 2WD V8-4.6L VIN 8 (2009)
6. Release the cooling fan shroud position tab and rotate the shroud upward until the lower tab locks into position.
7. Remove the 2 bolts and the oil drip shield.
-
To install, tighten to 7 Nm (62 lb-in).
8. Remove the power steering line clamp plate bolt, rotate the clamp plate and disconnect the power steering gear-to-fluid cooler return hose.
-
To install, tighten to 23 Nm (17 lb-ft).
9. To install, reverse the removal procedure.
10. Fill the power steering system.