F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
5. Remove the converter drain back valve and solenoid pressure supply screen.
6. Remove the main control valve body cover plate.
1
Remove the thirteen bolts.
2
Remove the valve body cover plate and gasket.
ASSEMBLY
1. Install the valve body cover plate.
1
Position the valve body cover plate gasket and cover plate.
2
Install the two guide pin bolts.
3
Install the valve body cover plate bolts.
NOTE: Before beginning assembly, perform/inspect the following:
When building up subassemblies and assembling the transmission, ALWAYS use new gaskets and seals.
All fasteners must be tightened to the torque specification indicated.
When building up subassemblies, each component part should be lubricated with clean transmission fluid. It is also good practice to lubricate the