F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
1. Bend the retaining ear back on the pressure sensor component bracket.
Item 2: Bladder (Occupant Classification Sensor) Installation Note
1. CAUTION:
-
Inspect the occupant classification sensor bladder, seat cushion pan and support assembly for any foreign objects, before installing the
occupant classification sensor to the seat cushion pan. If any foreign objects are found, remove them. Failure to do so may result in
personal injury, in the event of an air bag deployment.
-
Failure to route the seat occupant classification sensor components through the correct seat cushion support opening can cause
component failure.
Feed the OCS components (pressure sensor and hose) through the seat cushion pan opening.
2. CAUTION: Inspect the occupant classification sensor bladder, seat cushion pan and support assembly for any foreign objects, before
installing the occupant classification sensor to the seat cushion pan. If any foreign objects are found, remove them. Failure to do so may
result in personal injury, in the event of an air bag deployment.
Align the bladder to the seat cushion pan.
Item 4: Pressure Sensor Installation Note
1. Install the pressure sensor onto the seat cushion pan bracket, making sure the retaining ear is completely engaged.
-
When installed correctly, an audible click will be heard and the pressure sensor will not be able to be removed from its bracket without
disengaging the retaining ear.
Item 6: Electronic Control Unit (ECU) Installation Note
1. Slide the electronic control unit (ECU) into the seat cushion pan bracket.
