F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
3. NOTE: Swivel the U-Joint spider while installing the U-Joint cup.
Using the special tool, push the bearing cup into the flange bore and on the spider arm.
4. Push the bearing cup slightly below the shoulder in the flange bore.
5. Position the bearing cup spacer in the flange bore on top of the bearing cup.
^
The undercut on the bearing cup spacer fits against the shoulder in the flange bore.
6. CAUTION: Do not use excessive force on the bearing cup spacer after contact with the flange bore shoulder.
Use the special tool to seat the bearing cup spacer on the shoulder of the flange bore.
