F 150 4WD V8-4.6L VIN 8 (2010)
Seat Backrest Heater Mat - Front
Seat Backrest Heater Mat - Front
Removal
NOTICE: The heater mat is not designed to be separated from the foam pad. Doing so will damage the foam pad. Install a new foam pad and
heater mat. Failure to follow this instruction can result in seat component damage and system failure.
NOTE: For parts identification and location, refer to Seat - Exploded View, Front See: Service and Repair/Front Seats/Seat - Exploded View, Front.
1. Remove the seat backrest cover. For additional information, refer to Seat Backrest Cover - Front See: Seat Cover/Service and Repair/Front
Seats/Seat Backrest Cover - Front.
2. Disconnect the backrest heater mat electrical connector and detach the wiring harness.
-
Note wire harness routing for correct installation.
3. Remove the backrest foam pad with heater mat and discard.
Installation