F 150 4WD V8-4.6L VIN 8 (2010)
25. Connect the upper radiator hose to the radiator and install the clamp. Attach the radiator hose retainer to the cooling fan motor and shroud.
26. NOTE: RH shown, LH similar.
Position the wiring harness into place and connect the RH and LH front impact severity sensor electrical connectors and wiring harness pushpin
retainers.
27. Attach the wiring harness retainer to the RH side of the radiator grille support.
28. Position the wiring harness into place and connect the horn and ambient temperature sensor electrical connectors and attach the pushpin retainer.
29. Install the front bumper cover. For additional information, refer to Bumper.
30. Position and attach the hood latch release handle and cable onto the front bumper cover and install the bolt.