F 150 4WD V8-4.6L VIN 8 (2010)
31. Position the hood latch into place and install the 2 bolts.
-
Tighten to 25 Nm (18 lb-ft).
32. Install the 2 RH hood latch cable pushpin retainers.
33. Install the LH hood latch cable pushpin retainers.
34. Install the headlights.
35. Connect the battery ground cable. For additional information, refer to Battery.
36. Fill the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and Repair/Cooling
System Draining, Filling and Bleeding.
37. Recharge the A/C system. For additional information, refer to Heating and Air Conditioning.
38. Fill the power steering system. For additional information, refer to Steering.
39. Check the transmission fluid and fill as necessary. If equipped with a 6R80 transmission, refer to Automatic Transmission/Transaxle &/or
Transmission Control Systems.