F 150 4WD V8-4.6L VIN 8 (2010)
14. Install the starter. For additional information, refer to Starting System.
LH engine support insulator
15. If installing the LH engine support insulator in a 4WD vehicle, align the front axle CV joint at the index mark and install the 3 washers and 6 new
bolts.
-
Tighten to 19 Nm (168 lb-in).
All vehicles
16. Install the 2 transmission mount nuts.
-
Tighten to 103 Nm (76 lb-ft).
17. Install 4 new exhaust manifold-to-dual converter Y-pipe nuts.
-
Tighten to 40 Nm (30 lb-ft).
LH engine support insulator
18. Install the oil level indicator tube bolt and the oil level indicator.
-
Tighten to 10 Nm (89 lb-in).
All vehicles