ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3147 > < Initial Inspection and Diagnostic Overview|Page 3145
Page 30
background image

-

Is the resistance less than 5 ohms?

Yes

GO to J3.

No

REPAIR the circuit. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.

-------------------------------------------------
J3 CHECK THE MS-CAN (+) CIRCUIT BETWEEN THE HVAC MODULE AND THE DLC FOR AN OPEN

 

-

For EMTC, measure the resistance between the HVAC module C294a-12, circuit VDB06 (GY/OG), harness side and the DLC C251-3, circuit
VDB06 (GY/OG), harness side.

Initial Inspection and Diagnostic Overview|Page 3147 > < Initial Inspection and Diagnostic Overview|Page 3145