ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3149 > < Initial Inspection and Diagnostic Overview|Page 3147
Page 32
background image

-

Are the resistances less than 5 ohms?

Yes

CONNECT the negative battery cable. GO to J4.

No

REPAIR the circuit in question. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.

-------------------------------------------------
J4 CHECK THE MS-CAN (-) CIRCUIT BETWEEN THE HVAC MODULE AND THE DLC FOR AN OPEN

 

-

For EMTC, measure the resistance between the HVAC module C294a-13, circuit VDB07 (VT/OG), harness side and the DLC C251-11, circuit
VDB07 (VT/OG), harness side.

Initial Inspection and Diagnostic Overview|Page 3149 > < Initial Inspection and Diagnostic Overview|Page 3147