F 150 4WD V8-4.6L VIN 8 (2010)
-
Are the resistances less than 5 ohms?
Yes
GO to L3.
No
REPAIR the circuit. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.
-------------------------------------------------
L3 CHECK THE MS-CAN CIRCUITS BETWEEN THE AUDIO DSP MODULE AND THE DLC FOR AN OPEN
-
Disconnect: Audio DSP Module C3154a.
-
Measure the resistance between the audio DSP module C3154a-1, circuit VDB06 (GY/OG), harness side and the Data Link Connector (DLC)
C251-3, circuit VDB06 (GY/OG), harness side.