ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3211 > < Initial Inspection and Diagnostic Overview|Page 3209
Page 94
background image

-

Disconnect: DCSM C3265c.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance greater than 1,000 ohms?

Yes

CONNECT the negative battery cable. GO to W61.

No

GO to W45.

-------------------------------------------------
W45 VERIFY VEHICLE EQUIPMENT - GPSM

 

-

Inspect the vehicle for a Global Positioning System Module (GPSM).

-

Is the vehicle equipped with a GPSM?

Yes

GO to W46.

No

GO to W47.

-------------------------------------------------
W46 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE GPSM DISCONNECTED

 

-

Disconnect: GPSM C2398.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance greater than 1,000 ohms?

Yes

CONNECT the negative battery cable. GO to W62.

No

GO to W47.

-------------------------------------------------
W47 VERIFY VEHICLE EQUIPMENT - ILCM

 

Initial Inspection and Diagnostic Overview|Page 3211 > < Initial Inspection and Diagnostic Overview|Page 3209