F 150 4WD V8-4.6L VIN 8 (2010)
Installation
1. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place. Press the selector lever
cable into the bracket and listen for the selector lever cable to click into place. Pull back on the selector lever cable to make sure that it is locked
into the bracket.
Attach the selector lever cable to the selector lever bracket.
2. Connect the selector lever cable onto the manual control lever and move the locking tab down.