F 150 4WD V8-4.6L VIN 8 (2010)
-
Tighten to 35 Nm (26 lb-ft).
12. Install the LH exhaust heat shield bolt to the transmission crossmember.
-
Tighten to 15 Nm (133 lb-in).
13. Install the RH exhaust heat shield bolt to the transmission crossmember.
-
Tighten to 15 Nm (133 lb-in).
14. NOTE: Align the index-marks made during removal.
Install the front driveshaft.
15. If equipped, install the skid plate and the 4 skid plate bolts.
-
Tighten to 40 Nm (30 lb-ft).